- Self-publishing a paperback on KDP
- Self-publishing a Kindle eBook on KDP
- Creating an audiobook via ACX
How would you like to hold in your hands a beautiful paperback with a selection of your best articles in it? Just a dream? No, it’s a reality, it won’t take you long and it won’t cost you a penny either!!
The steps are, One, go to KDP (Kindle Direct Publishing) and register your name, book title and description. Two, upload your content and upload/design the cover. Three, set the price of your book and click the publish button! Your book will shortly appear for sale on Amazon’s websites, world-wide!
I published the ‘best of my blog,’ To Cut a Short Story Short: 111 Little Stories, through KDP and if you can run a blog, then you shouldn’t have many problems self-publishing. Realistically speaking, allow a week or two for learning the process of designing and creating a paperback and/or Kindle eBook.
My book has a beautiful cover, the paper is cream and smooth, with little show-through, and the appearance is much better than most professionally published paperbacks! It is VERY different from any ‘print on demand’ type book you may have previously bought from Amazon.
This article covers the publishing of a simple book i.e. table of contents and text, with KDP, in both paperback and Kindle eBook form, although you CAN also publish a range of other formats – comics, illustrated books etc. It is intended to be a brief overview to get you started, along with some tips from personal experience. Fuller details can be found via the links provided at the end.
Apart from a bar code and ‘printed by Amazon,’ you are solely responsible for creating the book content and cover. You also have control over many aspects of pricing and marketing. You can update the cover and/or the contents at any time, even after publishing, and it takes just a few hours for the new version to become active. You can also unpublish your book at any time.
Another self-publishing website is CreateSpace. I don’t have experience of that, but you may be interested to check it out. Some say they prefer it. All I can say is the quality of my KDP book is GREAT and it was relatively easy to do!
Remember, that self-publishing a book is NOT the same as selling a book! You are not going to get the publicity of a professionally published book with a publishing company behind you. However, whether you are aiming to sell a lot of copies or just to produce a book primarily for friends and family, the procedure is the same.
Firstly though, do you have enough quality articles for a collection? The book doesn’t have to be large, it can be just thirty pages or so, or it can be as thick as you like. You have to be realistic here. Although it won’t cost you anything, you should aim to put a quality product out there. The feedback you get about your blog should be helpful here, as well as constructive criticism from knowledgeable friends.
Secondly, as you will be designing the book yourself, you need to know how to format and punctuate your work correctly. If not, you can research it or get someone who DOES know to help out.
So, the first step is to prepare the MS (manuscript). Depending on how you created your blog you will either assemble the content by combining documents already saved in your word processor, or by copying and pasting from your blog into a new document.
KDP provide downloadable templates, which you may wish to investigate. I didn’t personally use one, so I will describe how I did it myself.
PAPER BACK ‘TRIM SIZE’
When you create a paperback, you will need to decide on the ‘trim size,’ or the actual size of the book. The default size on KDP is 6” x 9”. That is actually quite large. A more usual size is 5” x 7.75”. Once the book is published you CANNOT change the trim size so be sure you select a size you’ll be happy with. Having said that, the 6” x 9” size makes for a substantial book that looks very impressive!
To find the size options, you will follow steps one and two in the second paragraph of this article, entering your name and a provisional title. You don’t have to upload anything at this stage and can just ‘save and exit.’
Having left my trim size set to the default, I then set the page size in my word processor to these same dimensions i.e. 6” x 9”. I set a margin of 2 cm. top and bottom, 2.25 inner margin and 1.75 outer margin, and 1 cm. footer margin (for page numbers). I used Times New Roman 13 point with single line spacing to give a pleasantly sized, easy-to-read text. It also suited the length of my stories perfectly, fitting 200 word stories onto one page. You may well choose a slightly smaller font though. I also opted to keep the right hand margin unjustified, although it is more usual for this to be justified.
You can print out a couple of pages of 6 x 9, or whatever, onto A4 to assess the overall appearance, but later on you will be able to preview it on-screen in a realistic format.
Now, if you have a PC, chances are that you will be working with Word, in which case you shouldn’t have many problems, it works well with KDP and their help-desk is geared up to it.
If you are using a Mac (as I was) then if you are using the current version of Pages then, unfortunately, you are out of luck! You will need to view the pages side by side to control the layout, the so-called ‘two up’ view, and the ‘new’ version of Pages doesn’t have it. It also doesn’t have the ability to set internal hyperlinks, which you will need for the Kindle contents page. (This is the so-called ‘upgrade’ BTW!)
I used the Pages ’09 version with very few problems.
THE MANUSCRIPT AND CONTENTS TABLE
So you will now assemble the MS (manuscript), keeping the layout user-friendly. In my book I started all two page stories on the left hand page, and also made sure that any pages with just one or two sentences fell on a right hand page. You want to avoid awkward page turns and you may wish to start all articles on the right hand page for example. You can look through a few books on your shelves to get an idea.
You will need to construct a TOC (table of contents), which is also helpful for keeping an eye on the order you put your articles/stories in. The actual page numbers can be filled in afterwards.
I made a TOC in a separate spreadsheet program (Numbers ’09), which copied well to the paperback MS. However, it didn’t work well with the Kindle version, so for that I used the ‘table’ feature in Pages. As there are 111 stories (!) in my book, that was a lot more work than most people are going to have to do. So you can use a similar ‘table’ or ‘column’ feature of whatever word processor you are using.
The prelims or preliminary pages are the ones that precede the actual text. These include the title page, copyright notice, dedication, forward, etc. and TOC. These pages are numbered with lower case roman numerals. Normal numbering, starting from page 1, begins on the first page of actual text. To do this in my word processor (Mac Pages ’09) I had to learn how to split the MS into two sections. Then I numbered each separately using the appropriate number system. Not difficult though, once you know how of course!
You don’t need to have finished your MS to upload content. You can have a trial with a preliminary version to see how the process works. Basically you export your MS as a PDF file (the preferred format, although there are others) and then, in the second page of the KDP creation screen, click on ‘Upload paperback manuscript,’ browse to your PDF file and click on ‘open’ (or whatever) to upload it. Depending on the size of the book this will take a few minutes.
Whenever you upload content it automatically replaces the previous content.
If there are any spelling errors you are taken to a screen where you have the option to ‘ignore’ them. Alternatively, you can exit, fix them in your MS and re-upload. You can click on a button at this stage to have a list of the spelling queries e-mailed to you.
Your book cover is obviously of paramount importance as this is what will be displayed on Amazon. You can either use a cover you have designed in an external program, or KDP have a cover creation screen, on the same page as the ‘Upload paperback manuscript’ button. Click on it and you will be given the opportunity to upload an image and to select a design from various templates.
There is a KDP image gallery but it is very poor. I used an image from Google Images for Bound in Morocco and an image from Pixabay for To Cut a Short Story Short: 111 Little Stories. Pixabay is good as the images are high quality and free.
The only problem I found here was that the design I chose for To Cut a Short Story Short: 111 Little Stories (multiple clocks and part of a lady’s face) is very ‘busy’ and I couldn’t find any text colour for the book description that worked over the image. Surprisingly, the program doesn’t have the facility to put a block of colour on the cover for the text to be placed on, so I had to put my book description on the first page of the prelims.
There is also a space for information about the author and for you to upload a photograph. The cover creation program is quite flexible in terms of the fonts, font sizes and colour combinations you can select. I found it fairly straightforward and was very pleased with both of my covers in the end.
Once you have created a suitable cover and uploaded a MS you are ready to preview the book. You simply click on ‘Launch Previewer,’ at the bottom of the screen. The preview takes a few minutes to prepare, then you will see quite a realistic view of the book, where you can look through the pages to check the format, and even read the text, although it’s quite small. If you are not happy with any aspect of the book (quite likely!) you would exit the program here and either upload a corrected MS and/or go into the cover creation program to fix any issues there.
When you are happy, you click on ‘save and approve’ and then ‘approve.’ However, you can re-upload a corrected MS and/or change the cover at any time, even after publication. In the latter case it usually takes less than a day for the changes to take effect in the published product. That’s a fantastic facility and one I hadn’t expected.
Once you’ve approved the book as above you proceed to the pricing screen. The first time you publish on KDP you have to do a ‘tax interview,’ which takes a few minutes. As a non-US citizen I just had to mainly answer ‘no.’
Then you have to supply some international banking info. which can be obtained from your bank statement.
The way I priced my books was as follows. Firstly, I selected a paperback price that seemed realistic. Your royalty is 60% but the cost of the paperback comes out of this. To Cut a Short Story Short: 111 Little Stories, which is 256 pages, is charged at £3.30 to print a copy. The screen tells you how much you will earn per sale after deductions, VAT etc., so if you wanted to make, say, £2 per sale, you would adjust the price of the paperback accordingly to give this profit. You don’t want to set the book price too high but you don’t want to make too little profit either.
You choose a primary sales country (the default is U.S.A.), then all other prices are set from this, although they can be individually adjusted. Paperbacks have six sales zones and Kindle eBooks have 12. I left the primary sales country set to USA and then set a slightly different price for the UK, to give a more ‘rounded’ figure.
Finally, when all the above has been done, you are ready to hit the ‘publish’ button! Remember that your book will shortly be available for sale, so be sure it is a professional product. Although you can make changes, you don’t want anyone to buy it in the meantime and be unhappy, thus leaving a bad review! Also, that opens the ‘returns’ can of worms. There is no provision for proof copies so you will need to order a copy ASAP to check through it for errors. Then you will correct the MS and re-upload, as described above.
You are likely to get an e-mail, warning you that your content has been found on-line (if you select some text from one of your articles and paste it into Google then it will likely come up in many places where it’s been cached). You are asked to confirm that you are the copyright owner (if it’s all your own work then you are). So, in this instance, you proceed to your ‘Bookshelf’ on the KDP site, go into the title in question, go through to page 3 (Pricing) and click on Publish again.
There are some restrictions about what you are supposed to display on your blog versus what is in your book, which you can read if interested!
KINDLE eBOOK PRODUCTION
An eBook is quite a bit easier to produce than a paperback as there is much less to design. You don’t have to publish a paperback at all of course, although I think most of us would love to see an actual physical copy of our work!
Firstly you copy your paperback MS to a new file or start a new one (as described above) if you didn’t make a paperback. Kindle doesn’t use page numbers so disable this feature. Because of the different look of eBooks on different viewers and with different fonts it’s hard to control the format, but you don’t want headers to come at the bottom of a page for example. So I went through the whole MS, putting in page breaks before every heading and sub-heading. I found it necessary to do a ‘carriage return,’ then to add a page break, to get the right on-screen appearance. Indent settings are preserved though.
That’s really all you have to do with regard to the MS, but you will likely need an active TOC (table of contents) or readers cannot easily locate chapters.
In my program (Mac Pages ’09) I had to go through the whole book, clicking all 111 story headings and creating bookmarks from each. Then in the TOC I created hyperlinks to jump to these bookmarks. Tricky at first but easy once understood.
With Word there is an easier way to do this I understand, for which info is freely available.
The cover is created in a similar way to the paperback, but even if you designed a paperback cover in their program, you have to do it all over again for the eBook. Also, there’s nowhere to display the book description (there is no rear cover), so you need to put that in the prelims.
Having prepared the eBook as above you are ready to upload the file and preview it. The preferred format is .doc or .docx but there are a number of others. In my case I didn’t have the option to export to .docx and none of the other formats offered by my program preserved both italics AND the hyperlinks (aargh!). So I (eventually) used Zamzar, the brilliant free online resource, to convert my .pages file to .docx, which worked perfectly.
You can preview onscreen, or the way I prefer is to use the downloadable Kindle previewer app, which you can download from the Upload Manuscript screen. Then you will need to download an HTML version of your file, from the same screen. Then you locate this on your computer, unzip it and navigate to it from the previewer.
The previewer lets you simulate phone, tablet or Kindle and you can choose a wider variety of fonts than the on-screen viewer.
Once you are happy with the look of your eBook (and chances are you are going to have to modify your MS, re-upload and re-download another HTML version two, three or even more times!) you proceed to the Pricing screen, set your price and primary zone as discussed below, and click the Publish button. Again, you can easily make changes after publishing.
I found that Kindle prices vary wildly on published books. After a few false starts I decided to price my eBook such that I make about the same profit as for the paperback. This selling price will be considerably lower as you don’t have to pay for paperback production and the royalty can be higher too.
You have the option to join Kindle Select and to choose either 35% or 70% royalty. I couldn’t see any advantage to the lower rate, so chose 70%, leaving the primary sales zone set to USA and, again, adjusting the UK price to give a more ‘normal’ figure. Personally I couldn’t see any reason not to join Kindle Select either, which gives you additional revenue streams.
CHECKING SALES/GETTING PAID
KDP has a comprehensive online sales report page where you can easily track your sales and royalties. The first royalty payment is not made until 60 days after the end of the month in which your book first appeared for sale.
Well, the idea of turning your book into an audiobook may seem like another pipe dream, but again, it is a realistic aim! The company you deal with is ACX, Audiobook Creation Exchange. There is a sizeable audiobook creation ‘home industry’ with tens of thousands of ‘voice actors’ registered. They are known as ‘producers’ as they usually produce the finished product too.
If you think a collection of your blog articles/stories would make a good audiobook (and there are guidelines to this on the ACX site) then you register your details and upload a few pages of your book. This is then searchable by prospective producers. If they like the sound of it they may choose to ‘audition’ it, i.e. produce an audio clip of them reading it. You can then listen to any auditions and, if you like them, contact the producer.
The cost of producing the audiobook is charged by finished hour. So, for example, my book To Cut a Short Story Short: 111 Little Stories, is 256 pages long and would take about six hours to read aloud, according to ACX. The minimum charge is $225 per hour, so that would be about $1350 or £1050.
If you give exclusive rights to Audible, Amazon and iTunes, then you receive a 40% royalty on sales. If not, it’s 25%. Assuming you choose to do so (and why not?!) then you receive the full 40% royalty if you pay the producer upfront. Or you and the producer may agree to split the royalty, in which case you don’t pay anything up front. Then you and the producer both receive 20% forever. Bear in mind that most Audible audiobooks are sold for £8 or less, and, of course, the producer would have to be willing to gamble on producing an audiobook for an unknown author.
In a similar way to the book creation program, there are three screens to go through. When you get to the final screen you will be required (at some stage) to complete a ‘tax interview’ and provide international banking details. You have to do this even if you already provided the information in the KDP book creation program.
So I hope this article has been helpful in providing a useful outline of the self-publishing route. With the technology now available to print ‘on demand’ books of a very high quality at a realistic price, if you have the content, then there’s really nothing to stop you!
Kindle Direct Publishing:
Creating a copyright page for your book:
Free file conversion:
Audiobook Creation Exchange:
My KDP published books: